Meldorf Design Review (P1741)

Community Development Agency

Summary

Main Component of the Project

Residential Addition/Accessory Structure

Location

443 Wellesley Avenue
Mill Valley, CA 94941
Parcel Number: 050-043-60

Status

Approved

Project Planner

Evelyn Garcia
415-473-7173

Applicant

Charles Allen
415-850-4671

Project Description

The applicant requests Design Review and Accessory Dwelling Unit Permit approval to construct a 586-square foot accessory dwelling unit in the understory of an existing single-family residence in unincorporated Mill Valley. The existing floor area is 2,386 square feet. The proposed development would result in a floor area of 2,972 square feet. Therefore, the proposed development would result in a floor are ratio of 10 percent on the 28,800-square foot lot. The height of the building would not be changed. The proposed development would have the following distance from the property lines: 12 feet from the northern side property line; 28 feet from the front property line; 6 feet from the southern side property line; greater than 100 feet from the western rear property line

Design Review approval is required because the project is the planned zoning district. Accessory Dwelling Unit Permit is required because the accessory dwelling unit would entail new construction.

Zoning: RMP-1.5 (Residential, Multi-family Planned, 1.5 units/acre)
Countywide Plan Designation: MF2 (Multi-family, 1-4 units/acre)
Community Plan (if applicable): Tamalpais Community Plan

Most Recent Project Plans

Meldorf Plans 82217

Administrative Decisions

View the Administrative Decision

Design Review Board Meetings

TitleDateLocationDocuments
Tam Design Review Board08/02/17
07:00 PM

60 Tennessee Valley Road, near Hwy 1
Log Cabin
Mill Valley, CA 94941